​Quality custom & restoration sheet metal work & repair

Not all jobs done here are large I do a lot of small stuff also, the owner had moved the fuel tank to under the bed in the rear & wanted the fuel filler hole filled. This simple little piece had a lot of shape to it. A little shot bag forming then some hand planishing & trim to fit.

1957 Chevy Pu Fuel Opening Fill.

​First the inner lip was ground off then it was tack welded, then the tacks were ground down after wards it was hammered to make sure the shape was correct. After that then fully welded, ground then final hammer & dollied  for a smooth shape. Now ready for the paint shop.

​Nothing big & fancy just a clean little repair on a nice driver truck.